*WITH SEER H. PHOTO* Anybody know anything regarding this 9" stiletto?
Moderator: The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
*WITH SEER H. PHOTO* Anybody know anything regarding this 9" stiletto?
Hi Folks:
The knife is NOT a picklock and seems well made. The Damascus steel appears(feels) real. The tang is marked "Ducator Italy". ADDED A PHOTO OF SEER HOLE.
Thanks
Chuck
The knife is NOT a picklock and seems well made. The Damascus steel appears(feels) real. The tang is marked "Ducator Italy". ADDED A PHOTO OF SEER HOLE.
Thanks
Chuck
Last edited by huckles on Mon Jun 21, 2021 1:00 pm, edited 2 times in total.
-
- Posts: 650
- Joined: Mon Feb 11, 2019 2:08 pm
Re: Anybody know anything regarding this 9" stiletto?
-------------------------------------
It's a picklock.....? It sure appears to have a swivel bolster.
Can you see layers of steel inside the sear hole? Can't really tell from the photos.
It's a picklock.....? It sure appears to have a swivel bolster.
Can you see layers of steel inside the sear hole? Can't really tell from the photos.
Re: Anybody know anything regarding this 9" stiletto?
Not a picklock but looks like real deal otherwise....
Re: Anybody know anything regarding this 9" stiletto?
Thanks for clarifying on a swivel bolstster. The thing won't budge so I figured picklock. How can I tell so I don't make that error again. Is this a transitional or just some random modern?
Re: Anybody know anything regarding this 9" stiletto?
in your 1st photo notice the top of the stag, it's angled so the bolster can swing. picklock would be strieght
TRYKER
A man who brags about how smart he is, wouldn't if he was.
"Rose-colored glassses are never made in bifocals. Nobody wants to read the small print in dreams"
A man who brags about how smart he is, wouldn't if he was.
"Rose-colored glassses are never made in bifocals. Nobody wants to read the small print in dreams"
Re: *WITH SEER H. PHOTO* Anybody know anything regarding this 9" stiletto?
I’ve never seen that stamp, but I’d guess others have. Looks like a fairly new knife. It’s not a transitional knife. It doesn’t have any of the characteristics of that type of knife. You’ll never see a transitional with a Damascus blade. The stamp appears to been made by a laser. I’m not sure when lasers were first used to stamp a knife, but it wasn’t that long ago.
Nice knife,the stag looks good and I like the Damascus pattern too.
Nice knife,the stag looks good and I like the Damascus pattern too.
Your friend on the web's most friendly community on knives and blades,
John
Massachusetts Where Everything is Illegal or Taxed
John
Massachusetts Where Everything is Illegal or Taxed
-
- Posts: 650
- Joined: Mon Feb 11, 2019 2:08 pm
Re: *WITH SEER H. PHOTO* Anybody know anything regarding this 9" stiletto?
-------------------------
If the bolster will not swivel downward to lever the locking tab upwards ("won't budge") then something is wrong, because the knife was clearly designed to do this. It does not mean the knife is a picklock; it means that it's a malfunctioning swivel bolster knife. I would advise applying your Lubricant Of Choice to the pivot pin, and also try to spray some into any likely cracks and crevices between the bolster and liner. Hopefully you will be able to loosen things up and get it working again.
Looks like layers galore inside the sear hole.... seems to be a sure-'nuff Damascus blade!
If the bolster will not swivel downward to lever the locking tab upwards ("won't budge") then something is wrong, because the knife was clearly designed to do this. It does not mean the knife is a picklock; it means that it's a malfunctioning swivel bolster knife. I would advise applying your Lubricant Of Choice to the pivot pin, and also try to spray some into any likely cracks and crevices between the bolster and liner. Hopefully you will be able to loosen things up and get it working again.
Looks like layers galore inside the sear hole.... seems to be a sure-'nuff Damascus blade!
Re: *WITH SEER H. PHOTO* Anybody know anything regarding this 9" stiletto?
If oiling and cleaning the swivel bolster doesn’t work, try slipping one razor blade between the bolster and liner.
Your friend on the web's most friendly community on knives and blades,
John
Massachusetts Where Everything is Illegal or Taxed
John
Massachusetts Where Everything is Illegal or Taxed
Re: *WITH SEER H. PHOTO* Anybody know anything regarding this 9" stiletto?
In the second picture the bolster appears hollow, be this is of Pakistan manufacturer.
- Bill DeShivs
- Yes.
- Posts: 7392
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: *WITH SEER H. PHOTO* Anybody know anything regarding this 9" stiletto?
Modern production Italian knife.
Marked for a retailer.
Marked for a retailer.
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
Re: *WITH SEER H. PHOTO* Anybody know anything regarding this 9" stiletto?
The stag handle does seem very close to the bolster and that maybe the issue too....
Re: *WITH SEER H. PHOTO* Anybody know anything regarding this 9" stiletto?
I'm pretty sure that knife is a Frank b. I would need some pictures of the badges and all in one piece. The knife probably originated with a shiny bayonet blade and was then customized by the old owner. But when he reassembled it he made some gross errors. He wrongly pressed the revolving blade-escutcheon pin, blocking it and probably damaging the escutcheons as well. I give you some advice, with all the calm you have and slowly, insert a fairly large screwdriver between the two escutcheons looking at the back of the spring and begin to push the screwdriver from left to right and vice versa by levering the two ears now of the rotating escutcheon now in the fixed escutcheon. Slowly how to leverage to free the escutcheons that are pressed against the blade. You should be able to free it but I don't know if you will, they may have tightened the pin too tightly.huckles wrote: ↑Mon Jun 21, 2021 3:38 am Hi Folks:
The knife is NOT a picklock and seems well made. The Damascus steel appears(feels) real. The tang is marked "Ducator Italy". ADDED A PHOTO OF SEER HOLE.
Thanks
Chuck
20210620_210718.jpg
20210620_210757.jpg
20210620_210348.jpg
20210620_210433.jpg
20210621_075125.jpg
Ivano Beltrame
-
- Posts: 650
- Joined: Mon Feb 11, 2019 2:08 pm
Re: *WITH SEER H. PHOTO* Anybody know anything regarding this 9" stiletto?
huckles ~ Forgive me if this post is unnecessary.... in case the term "escutcheon"
is confusing, Mr. Beltrame is referring to what we know as the (front) bolsters.
is confusing, Mr. Beltrame is referring to what we know as the (front) bolsters.