Frank Beltrame Stilettos - Replacement Parts?
Moderator: The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
Frank Beltrame Stilettos - Replacement Parts?
Does anyone know of a place that sells replacement parts for Frank Beltrame stilettos? What I'm actually looking for is a different blade (as I just finished destroying mine with some horrible dremel work). Would just buy another one, but I'd like to just replace the blade for sentimental reasons.
Re: Frank Beltrame Stilettos - Replacement Parts?
What size and style of blade do you need? Parts come from other knives. It’s too bad that parts aren’t easily available from the manufacturers in Italy. Someone may have a blade, but it may not fit. When it comes to pick locks or swivel bolsters the locking pin may not line up with the locking tab.
More info please.
Good luck,
John
More info please.
Good luck,
John
Your friend on the web's most friendly community on knives and blades,
John
Massachusetts Where Everything is Illegal or Taxed
John
Massachusetts Where Everything is Illegal or Taxed
Re: Frank Beltrame Stilettos - Replacement Parts?
The knife is an 11" with 5" blade. This is the exact knife minus the handle color:john wrote:What size and style of blade do you need? Parts come from other knives. It’s too bad that parts aren’t easily available from the manufacturers in Italy. Someone may have a blade, but it may not fit. When it comes to pick locks or swivel bolsters the locking pin may not line up with the locking tab.
More info please.
Good luck,
John
https://www.bladehq.com/item--Frank-B-1 ... ayo--31667
Current blade is bayonet. I wouldn't mind swapping it to a kris blade, however I would take whatever I could get as far as blade style.
Re: Frank Beltrame Stilettos - Replacement Parts?
This is the wrong size, but maybe you can contact this site to see if they have it in 28cm. As I've never personally seen single blades for sale anywhere else. Good luck! http://www.pvk.vegas/Frank-Beltrame-23C ... -blade.htm
"By accepting you as you are, I do not necessarily abandon all hope of your improving"- My Wife (1963-Present)
Re: Frank Beltrame Stilettos - Replacement Parts?
Greatly appreciated! I have done just that. Awaiting their reply.JulesVane wrote:This is the wrong size, but maybe you can contact this site to see if they have it in 28cm. As I've never personally seen single blades for sale anywhere else. Good luck! http://www.pvk.vegas/Frank-Beltrame-23C ... -blade.htm
Re: Frank Beltrame Stilettos - Replacement Parts?
hi simply buying a blade will most likely not work as each blade and backspring are fitted to each other so just swaping a blade out will not work correctly.
if you bought 10 Frank beltrame stilettos took them apart tried swaping blades around they will not work correctly. each blade and backspring are fitted to each other at factory no 2 are same they might be close very close but not same.
if you bought 10 Frank beltrame stilettos took them apart tried swaping blades around they will not work correctly. each blade and backspring are fitted to each other at factory no 2 are same they might be close very close but not same.
Re: Frank Beltrame Stilettos - Replacement Parts?
That makes sense.METALGOD wrote:hi simply buying a blade will most likely not work as each blade and backspring are fitted to each other so just swaping a blade out will not work correctly.
if you bought 10 Frank beltrame stilettos took them apart tried swaping blades around they will not work correctly. each blade and backspring are fitted to each other at factory no 2 are same they might be close very close but not same.
I also received a response from the site given in the link above and they stated the blades they have they bought a long time ago and that's all they have. Said they were hard to come by. Looks like I'm sol. Oh well, was worth a shot. That'll teach me not to take a dremel to a custom Italian switchblade!
Re: Frank Beltrame Stilettos - Replacement Parts?
Don’t give up. If you do find s blade, it or your knife may need a minor adjustment for it to work properly. Also. A blade can be custom made by several of the forum members.
Your friend on the web's most friendly community on knives and blades,
John
Massachusetts Where Everything is Illegal or Taxed
John
Massachusetts Where Everything is Illegal or Taxed
- whippersnapper
- Posts: 8430
- Joined: Sat Oct 16, 2004 12:39 pm
- Location: Michigan
Re: Frank Beltrame Stilettos - Replacement Parts?
I have a couple blades for 9 inch Franks but no 11"...sorry