A niece of mine is an avid amateur Chef (but not yet a knife afi), and this black ceramic knife (a rebranded Kyocera) is one of her favorites in the kitchen, as due to the tougher blade material the edges can be made thinner and thus the knife cuts better than a white ceramic version.
Longtime use however (not always on a suitable cutting board) plus storing it unprotected in a drawer between a bunch of steel bladed knives had blunted the edge to a point next to unusable, complete with quite a lot of (micro) chips and a broken tip.
This is the knife as it was when i received it.
(when you click the pictures 2 x you can see the chips clearly)
This is the knife after sharpening.
I reprofiled the rather bad factory edge to an ever so slight convex edge of +/- 25 degrees inclusive, and the sharpness is just hairwhittling (only towards the root, not to the point)
It easily slices single layer toiletpaper (torn apart 3-layered version) and a tomato of course.
Removing the chips and setting the new bevel was done with a Tormek T7, refining & convexing with a Paper Wheel coated with 15 micron diamond compound, and semi-polishing with a second Paper Wheel coated with 6 micron diamond compound.
Specs:
Overall length: 11.0 inch (28,0 cm)
Blade length: 5.8 inch (14,8 cm)
Blade thickness: 1,84 mm
Blade type: black ceramic / saber-hollow
Thickness behind the edge: 0,4 mm
A black (HIP) blade is made out of a black zirconium oxide and offers extra durability.
This type of blade goes through an extra firing process called a "hot-isostatic press," creating a tighter weave between the ceramic molecules, thus creating a tougher blade.
The white ceramic blade is also made out of zirconium oxide, but does not go through this expensive sintering process.
Sharpening a black ceramic kitchen knife
Moderators: natcherly, The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
Sharpening a black ceramic kitchen knife
Last edited by kwackster on Fri Nov 09, 2018 9:10 pm, edited 1 time in total.
Re: Sharpening a black ceramic kitchen knife
Slicing a tomato with it's new edge: https://www.youtube.com/watch?v=R3-A0SMcIbw
Re: Sharpening a black ceramic kitchen knife
I always have been a big fan of black ceramic kitchen knives. They look downright elegant in all black!
Sharpening a black ceramic kitchen knife
I have had my knives sharpened at Bass Pro for years and the older man there has always done an awesome job. However, the last few times it has been a different guy and he is not as good and my knife just does not come back as sharp.
I thought I would look around here in Murfreesboro to get it done. Do any of yall know a place that can put a nice edge on my blade? I am horrible at it and also dont have the right stuff to sharpen that blade as it is made from a really hard steel.
I thought I would look around here in Murfreesboro to get it done. Do any of yall know a place that can put a nice edge on my blade? I am horrible at it and also dont have the right stuff to sharpen that blade as it is made from a really hard steel.