Bill. Do you need a mill to cut/form the locking pin on the blade ? Or can this be accomplished through deft file work? I don't mean making the pin and then press fitting it.
Thanks, and Merry Christmas to you and yours.
Ted
Reading about blade lock pins on the 101 forum - Pin Question
Moderators: Bill DeShivs, The Motley Crew
Forum rules
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
There are a few things you should know before posting in these forums. If you are a new user, please click here and read carefully. Thanks a lot!
- Bill DeShivs
- Yes.
- Posts: 7358
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Reading about blade lock pins on the 101 forum - Pin Question
The pin should be integral to the blade. It's very easy to do. Just cut it out square along with the blade outline and file the 4 corners round. There was one custom maker who swore by press-fitting the pins. That pin gets a pretty rough ride when the knife is opened, and one that is pressed in probably won't last too long before it loosens.
Merry Christmas!
Merry Christmas!
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
- JimBrown257
- Posts: 2053
- Joined: Tue Apr 17, 2012 10:50 am
- Location: Michigan
Re: Reading about blade lock pins on the 101 forum - Pin Question
Not to mention that installing a separate locking pin is actually harder than just making the blade with a locking pin on it.
Re: Reading about blade lock pins on the 101 forum - Pin Question
Thanks Bill. I noted that integral pin question advice on the 101 forum. One other question if I may.
Is it possible, [using a micrometer as you progress] to file a nice relief clearance around pivot holes on slip joint liners such that the use of washers aren't needed using only jewellers, escapement and/or needle files including perhaps diamond coated curved rifflers and do a decent job of it.
According to some of the guys on Knifedogs unless you have a $2000 bench mill you should forget about trying to make a decent washerless slipjoint.
I'm inspired by the lovely file work the guy on the Clickspring youtube channel does.
Is it possible, [using a micrometer as you progress] to file a nice relief clearance around pivot holes on slip joint liners such that the use of washers aren't needed using only jewellers, escapement and/or needle files including perhaps diamond coated curved rifflers and do a decent job of it.
According to some of the guys on Knifedogs unless you have a $2000 bench mill you should forget about trying to make a decent washerless slipjoint.
I'm inspired by the lovely file work the guy on the Clickspring youtube channel does.
Last edited by tedmen on Mon Dec 30, 2019 10:49 pm, edited 1 time in total.
- Bill DeShivs
- Yes.
- Posts: 7358
- Joined: Sat May 25, 2002 2:50 pm
- Location: In de lan o' cotton
- Contact:
Re: Reading about blade lock pins on the 101 forum - Pin Question
Certainly, you can file a relief in liners. It may not look as nice as milled liners, but it will work just as well. The raised portion doesn't even have to be round-it can be diamond shaped, square, or odd shaped as long as it's there.
That said, knives were made for hundreds of years without washers OR relief cuts.
That said, knives were made for hundreds of years without washers OR relief cuts.
Bill DeShivs, Master Cutler
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.
http://www.billdeshivs.com
Factory authorized repairs for:
Latama, Mauro Mario, LePre, Colonial, Kabar, Flylock, Schrade Cut Co., Presto, Press Button, Hubertus, Grafrath, Kuno Ritter knives, Puma, Burrell Cutlery.